top of page
Taj.webp

Texas DPS Tactical Training Center

810 Co. Road 240, Florence, Texas 76527

The Texas DPS Tactical Training Center is a 1,000+ acre multi-purpose training facility located in the heart of central Texas. The facility has a large, multi-story training building that houses multiple classrooms and training areas. In addition to the driving track and firearms range, the TTC is the location for the DPS UAS Training Complex.

​

Vendor indoor booths will be located in the main building cafeteria. Presentations will take place in a variety of classrooms and flight demonstration and outdoor setups will be in the areas marked below

All events for vendor day will take place at the main training building. Indoor vendor spaces will be inside the 4000 sq. foot cafeteria area. Outdoor spaces will be in the adjacent parking lot. Indoor presentations will take place in classroom 125 (downstairs) and flight demonstrations will take place out the back door of the building. Event parking is marked on the map with an additional overflow area as needed.

UAS Training Complex

Texas DPS has a dedicated training facility for UAS education. This site includes a 50 person classroom, 10 NIST open lanes, obstructed lanes and indoor flying structure with confined lanes. The UTX will be utilized for the Basic RPIC Course and the flying component of the Advanced RPIC Course.

 

Click here for a map to the UTX

UAS Training Complex.png

Building Layout

Once you arrive please check-in at the registration desk as you enter the facility. To the left of your entrance will be the Vendor booth area. Out the back doors will be the flight demonstration area and to the right will be classroom 125 where vendor presentations will take place.

​

Upstairs is the TAK vendor area, classroom 204 (speaker presentations) and classroom 202 (TAK presentations).

TAJ Downstairs 111423.jpg
cafeteria layout final.jpg
Second floor.png
outdoor final.jpg

Flight Demo Area

Flight demonstrations will take place out the back doors of the main building under the supervision of the Airboss. Vendors should arrive 5 minutes prior to their scheduled flight time. Below is map of the flight area accessible during the flight demo. The TTC flight area is class G airspace.

​

NOTE: No flights will occur except those scheduled and after approval for launch from the Airboss

TTC acre map.png

Texas DPS Public Safety Drone eXpo & TAK Workshop

Texas DPS | Tactical Training Center

810 Co. Road 240 | Florence, Texas 76527

DPS_Seal_4C.png
atak-tx-logo.png

For assistance during the event call Jason Day @ 512.221.6556 or Aaron Fritch @ 512.963.0857

bottom of page